5V Relay One Channel Module Low-level trigger for Arduino projects
- It can be used to Controls DC or AC signals of 220V AC load.
- The running voltage of module: 5v can be available in 6v,12v and 24v.
- The size of PCB Board : 2.0 x 4.3 cm.
- Come with a power indicator and signal output indicator LEDs.
- Can be useful to manipulate a motor, a LED strip, or another module using. the way to use it: just connect a virtual output of your to your relay module.
2 Channel 5V Relay Module for Arduino, Raspberry pi and microcontroller projects
Buy Relay Module here👇👇👇
The 2 Channel isolated relay module of 5V 10A Optocoupler for Arduino and other microcontrollers.
- It could be used to manipulate numerous appliances and different varieties of devices.
- The relay module could be controlled immediately with 3.3V or 5V common sense indicators from a microcontroller (Arduino, 8051, AVR, p.c, DSP, ARM, ARM, MSP430, TTL logic).
- This relay has a 4 pins header for connecting electricity (5V and 0V), and for controlling the two relays.
The pins on the relay module PCB as:
GND – for ground pin connection.
IN1 – Use to control relay 1.
IN2 – Use to controls relay 2.
VCC – Connect 5V to this pin to power the relay module and also used to power the optocoupler.
This 5V dual Channel Relay Module is for low-level trigger handiest.
4 Channel 5V Relay Module for Arduino, Raspberry pi and microcontroller projects
Buy Relay Module here👇👇👇
6 Channel 5V Relay Module for Arduino, Raspberry pi and microcontroller projects
The 6 Channel 5V Relay Module with Optocoupler. The relay commonly open interface most load: AC 250V/10A, DC 30V/10A.
Functions:
6-way relay output module contact potential is 10A 250V.
enter IN1, IN2, IN3, IN4, IN5, IN6 sign, a low degree is powerful.
the use of single-chip layout, dependable overall performance, strong anti-interference, no false triggering, advanced overall performance.
The cause terminal has optocoupler isolation, the independent external electricity supply can trigger isolation.
Each relay has an indicator light.
With four fixed bolt holes for smooth set up.
8 Channel 5V Relay Module for Arduino, Raspberry pi and microcontroller projects
Buy Relay Module here👇👇👇
16 Channel 5V Relay Module
Buy Relay Module here👇👇👇
The 16 Channel 5V Relay Module with Optocoupler, Be able to manage diverse appliances and other gadgets with a big modern.
It could be managed without delay by a Micro-controller (Arduino, 8051, AVR, ARM, TTL logic).
The 5V 16-Channel Relay interface board needs a 15-20mA driver modern-day. The board has features indicating LED for Relay output popularity and the same old interface that may be controlled without delay by using a lot of widely used microcontrollers like Arduino and many others.
The 5V electromechanical relay module with an AC touch ability of 250V also consists of light coupling protection(optocoupler) for isolation of manage circuitry.
Functions of 16 Channel 5V Relay Module with Optocoupler
5V relay with AC contact ability of 10A 250V and optocoupler protection.
The onboard strength supply module does not need an external strength to deliver. I / O port motive force is active low.
The module may be used as a microcontroller improvement board module and additionally as equipment management output.
Used as a microcontroller improvement board, may be used for controlling domestic types of equipment.
Thank You!
Have A Great Day!
